DEV010B RGB 1.69″ OLED STM32F030RC

DEV010B RGB 1.69″ OLED STM32F030RC – Detailed Product Page

20191021 – new – DEV010B STM32F091RC – FW01 – MODBUS SLAVE DISPLAY with IO 

QuickLinks

DEV010B RGB 1.69″ OLED STM32F030RC – Downloads
– Schematic and PCB in pdf
– Gerbers and BOM and Parts List
– DEMO Firmware
– Bezels and Enclosures
DEV010B RGB 1.69″ OLED STM32F091RC – FW01 – MODBUS SLAVE DISPLAY with IO
DEV010B RGB 1.69″ OLED STM32F030RC – APP01 – ST7735S 1.8″ TFT Demo
DEV010B RGB 1.69″ OLED STM32F030RC – APP02 – SEPS525 1.69″ OLED Demo
DEV010B RGB 1.69″ OLED STM32F030RC – APP03 – ePaper 200×200 BW Demo
DEV010B STM32F091 OLED DEV Board

DEV010B STM32F091 OLED DEV Board

PCB Size 50mm x 50mm
OLED View Area 1.69″ (35.6mm x 28.9mm)

Latest Docs

20191021 – FW01 release 20191021_1500, MODBUS SLAVE DISPLAY with IO – see the link at the top of the page

20190128 – see the downloads for SCH HWV1R02, BOM, ASSYs PDFs, included with Gerbers download – links at top of page

See the downloads for SCH and PCB PDFs – links at top of page

Description
This is a nice little board that mounts a 1.69″ RGB OLED (SEPS525) with a ST STM32F030RC (although I have been using a STM32F091RC for all development thus far).

DEV010B STM32F091 OLED DEV Board

DEV010B STM32F091 OLED DEV Board

  • Excellent little board for display development
  • Use for OLED / SPI display / IIC display development
  • Small enough to integrate into existing products – connect to host system using UART or IIC, can use 5V or 3V3
  • JST SH connectors for I/O
  • IIC, UART, SPI2 ports available on the JST SH headers (a few Analog inputs are also available)
  • Both Low and High frequency crystals on board (but no separate battery power domain, all on the one VDD 3V3 supply)
  • Uses LM1117 (or equ) for VDD – 2V5 and 3V and 3V3 possible depending on part mounted
  • Separate programming header – UART Bootloader and SWD can be used
  • OLED boost (TLV61046A) has integrated switch – OLED VDDH controlled by STM32
  • OLED uses SPI connection (STM32 SPI1)

We have Bezel designs (for mounting into a panel) and Enclosure Designs – see below

Available Firmware

FW01 – This firmware implements a MODBUS SLAVE.

Requires a STM32F091RC on the board.
The firmware includes a flexible setup through modbus registers.
There are flexible display objects, and handling for Analog Inputs and Digital IO.
Supplied as a hex file, requires keys to save register setup to on board Flash.

APP01 – Demo with 1.8″ TFT display – links at top of page – included with gerbers

APP02 – Demo for the 1.69″ SEPS525 OLED – links at top of page – included with gerbers

APP03 – Demo for 200×200 ePaper display – links at top of page – included with gerbers

Bezels and Enclosures – DEV010B BEZEL01

DEV010B OLED Bezel (BEZEL01)

DEV010B OLED Bezel (BEZEL01)

DEV010B OLED Bezel (BEZEL01)

DEV010B OLED Bezel (BEZEL01)

BEZEL01
Face 75mm x 75mm
Cutout 55mm x 55mm
Screw Holes 66.5mm centre-centre

Bezels and Enclosures – MECH022

DEV010B OLED MECH022

DEV010B OLED MECH022 Enclosure

MECH022 – Enclosure for DEV010B OLED Dsiplay and IO
Face 65mm x 65mm
Depth 50mm
4 x LLTM14 connectors
Dovetails for interlocking displays side by side
Dovetails for mounting

Archives (Docs / FW / App)