DISP102 RGB 1.8″ TFT / DispIDC-20 STM32F091RC PCB
– STM32 with 1.8″ TFT display or DispIDC-20 for external display
– Use for Distributed IO, MODBUS, Small Controllers
– FW01 – MODBUS SLAVE DISPLAY with IO available
– DEMO APPs for different display with source available with Gerbers purchase
– Samples available (either direct or dropship from PCBWAY)
– IOB0xx coming soon – isolated RS485, 24V Supply, IIC ports, 3DP enclosure
– Bezel Designs coming soon

DISP101 DEV010B RGB 1.69″ OLED STM32F030RC
DISP101 DEV010B RGB 1.69″ OLED STM32F091RC – FW01 – MODBUS SLAVE DISPLAY with IO
– STM32 with oLED display
– Use for Distributed IO, MODBUS, Small Controllers
– FW01 – MODBUS SLAVE DISPLAY with IO available
– DEMO APPs for different display with source available with Gerbers purchase
– Samples available (either direct or dropship from PCBWAY)
– IOB002 available – isolated RS485, 24V Supply, IIC ports, 3DP enclosure
– Bezel Designs Available

ALDI XFINITY Battery Notes
– ALDI XFINITY Battery Notes (5S Lithium Ion Battery)

MECH027 ALDI XFINITY Battery Clip
– ALDI XFINITY Battery Clip (5S Lithium Ion Battery)

MECH028 ALDI XFINITY Battery & WOWLED Light
– WOWLED 27W (real power consumption 20V @ 0A8) Light with Mag Base and Handle
– ALDI XFINITY Battery (5S Lithium Ion Battery)

MECH030 ALDI XFINITY Battery Clip
– ALDI XFINITY Battery Clip (5S Lithium Ion Battery)
– M4 CS mounting screws

PWR008 ALDI XFINITY Battery with RUI DENG DHP5005 BuckBoost Power Supply
– ALDI XFINITY Battery (5S Lithium Ion Battery) Clip MECH030
– RUI DENG Buck Boost Power Supply
– 4mm banana sockets
– Battery Power Switch

BLE014 CC2640S1 for PT100 Probes
– Bluetooth Wireless Sensor for external PT100 Probes

BLE013 CC2640S1 EnviroProbe
– Bluetooth Wireless Sensor with Environmental Probe for IIC Sensors

BLE012 CC2640S1 with IIC port for external sensor probes
– Bluetooth Wireless Sensor for external IIC Sensor Monitoring

BLE010 CC2640S1 Environmental Sensor
– Bluetooth Wireless Sensor for Environmental Monitoring

BLE009A CC2650STK Sensor Tag IO Demo Dev Board
– Bluetooth Wireless Sensor Development – TI Sensor Tag

BLE005 CC2650STK Sensor Tag IO Demo Dev Board
– Bluetooth Wireless Sensor Development – TI Sensor Tag – Relay Contact Monitor

IOB001 IO Box – Industrial Mobile
– V1 – Mobile Plant, 5 x PT100s, RS485, Bulletproof Power Supply
– V2 – Mobile Plant, 4 x PT100s, 2 x Load Cells, RS485, Bulletproof Power Supply

IOB002 IO Box – Industrial Distributed IO RS485
– Isolated RS485 for distributed system
– 24V Supply (Internal LMR16006 Buck Power Supply, 36V standoff transient protection)
– 2x IIC Ports for Sensor Probes

DIN001 Distributed Controller
– Fan Interface – BMS / HVAC / IO / Car Park Ventilation
– Isolated RS485, Robust Power Supply, IO

PWR004 LM5146Q Wide Range Input Buck Power Supply
PWR004 PCB intended for a local power supply for gateways and other devices powered over longer cable runs or in applications where a wide input range is required.

CTRL011 STM32L4A6 BG96 BLE S1G
– LOW POWER – potential for battery operation
– 4G Cellular
– Data Acquisition / Data Logging
– Wireless Gateway
– Displays – oLED – ePaper

CTRL012 STM32F4xx Ethernet S1G Lora BLE IO
– Data Acquisition / Data Logging
– Wireless Gateway
– Displays – HUB75 Led Matrix – TFT – oLED

MECH020 Wireless System Enclosure 80x80x80
– Multiple LLT M14 connectors for IO
– 2 x 26650 Li Cells
– Multiple SMA Jacks for external Antenna

MECH021 Wireless Sensor Enclosure 3DP 90x40x30
– Single LLT M14 connector for Sensor Probes
– 2 AA cells

MECH022 DEV010B OLED Display Enclosure 3DP 65x65x50
– DEV010B OLED Display with 4x LLTM14 Connectors
– Dovetail interlocks to mount displays side by side

Furzy Develops Industrial Grade Electronic Product, applications include..

• Mobile Industrial Plant
• HVAC
• BMS (Building Management I/O points)
• BLE (Bluetooth Low Energy) and Sub 1G

We design to be bulletproof (within commercial reality).

Our Industrial Mobile Plant designs operate through load dump, and are built to suit the application, including vibration, temperature and ingress.

Our distributed control (HVAC and BMS and Industrial Plant) use isolated data ports, protected I/O, and robust power supplies.

Please do not hesitate to contact us if you are interested in any product or its application.

Current Product Development Road Map – product under development

• Wireless Sensors – Battery Operated – no installation wiring
  • Thermocouple Sensor
  • PT100 Sensor
  • Current Transformer
  • Rogoweski Coil (for example see the LEM ART series)
  • Ph, ORP, Temperature all in one probe
  • Environmental (Temperature, Humidity, Ambient Light)
  • Gas (Electrochemical Cell) Sensor
• BMS (Building Management Systems) Sensors and IO Points
  • Distributed Controllers on RS485
  • Wireless Sensor Gateways
• Industrial Mobile Machines
  • Displays and Operator Interfaces
  • Power Supplies
  • IO (Temperature, Pressure, Flow)
  • Alarm Displays / Beacons (Remote Controlled Beacon)
• Underground Car Park Fan Control System / HVAC
  • Using MODBus and BACNet controllers (see our DIN001 and DIN002 Distributed Controller Products)
  • Simplified Wiring and Modern Control Strategy to save on Power Consumption
  • Connects to Carbon Monoxide (4-20mA or Smart) Sensors
  • Connects to Stand Alone Smoke Detectors
  • Connects to FANs with built in Speed Controllers

Upcoming (2019 release) 4G Cat M1 wireless development board

• CTRL011 STM32L4A6 BG96 BLE Display and Wireless Modules

CTRL011 Block Diagram

Upcoming (2019 release) Wireless Sensors

• BLE012 – LLTM14 IIC Port – for external IIC Sensors
• BLE013 – Enviro Sheath Probe – for IIC Sensors
• BLE014 – LLTM14 PT100 Port – for external PT100 Probe Sensors

MECH021 Wireless Sensor Enlcosure 3DP

Wireless Sensor – Environmental – BLE010

– BLE Wireless
– AA Cell Powered (Alkaline or Lithium)
– on board boost conveter – stable 3V3 supply
– sensor options – TI HDC2010YPA or Bosch BME280
– temperature, humidity, ambient light and optional pressure (BME280)
– 1 to 4 years operation depending on advertising rate and LED use
– normal operating mode is broadcast
– magnetic reed switch for keys to access a connectable BLE mode for setup
– on board headers for other sensors / development
– TI CC2640S1 (Radioland) module – on board ceramic antenna
– SZOMK off shelf enclosure
– top side SMT

BLE010 Environmental Sensor

Use Cases (firmware available) :
– Indoor Environmental Sensor – as shown above
– Pulse Accumulator for Metering (eg Water) – review the product page, contact us to fast track an adaptation in a similar PCB form factor

Use Cases (firmware not yet available) :
– External Sensor Probes (eg Duct Sensing) – contact us to fast track an adaptation in a similar PCB form factor with firmware

BLE based development boards – BLE009A

BLE009A TI CC2650STK Sensor Tag Demo Dev Board

BLE based development boards – BLE005

BLE005 CC2650STK TI Sensor Tag IO Board

BLE based development boards – BLE007

BLE007 CC2650STK Boards in Electrical Junction Enclosure

The BLE007 is a concept that shows how a complete sensing system can be housed in a low cost readily available enclosure.

Out product roadmap includes gas sensors in this physical arrangement.

Mobile Industrial – Road Grinder Drum Temperature Monitoring System

Road Grinder Drum Temperature Monitoring System

SYS001 Road Grinder Drum Temperature Monitoring System
– Daylight Readable
– Robust Metal Display and I/O enclosures – ingress protection
– Robust Plastic IP connectors
– USB Flash Drive Settings Update
– Display Colour Temperature Threshold Settings can be adjusted by the owner
– Fahrenheit and Celsius display options
– 5 PT100s installed on the apron of the slurry vacuum apron
– real time color bar operator display – no thinking required – at a glance obvious feedback
– better machine utilisation from improved confidence
– lower machine downtime from reduced blade burnouts
– Supplied exclusively through Seovic Civil Engineering

Mobile Industrial – HMI

HMI001 64×32 RGB LED Pixel Display
– See above Drum Temperature Monitoring System
– 4mm pixel pitch – can be seen at a distance
– Robust Display
– Plastic IP connectors
– Isolated RS485 Ports
– Internal Processor has the power to run MODBUS Master and/or MODBUS Slave
– USB Host for USB Flash Drive

Mobile Industrial – IO

IOBOX001 Bulletproof Power Supply and GPIO in a MECH006 Enclosure
– See above Drum Temperature Monitoring System
– Up to 8 Waterproof Connectors
– Power Supplyoperates through load dump
– GPIO includes PT100s, 4-20mA, Voltage Sensors (each input Isolated from each other)

Mobile Industrial – Enclosures

MECH006 Enclosure

Mobile Industrial – Remote Control Beacon

RCTX001 RCRX001 RC Beacon for Industrial Plant

RCTX001 & RCRX001
– BLE for setup
– Sub 1G (433MHz Aust, 915MHz US) for transciever
– 4 control buttons each with LED lighting  (Red, Yellow, Green, Blue, White)
– 12V vehicle / 24V vehicle options
– contact us for Lithium Battery Powered Option
– the beacon can be controlled by multiple controllers
– The controller displays the current state of the beacon

Mobile Industrial – Robust Power Supplies that Operate Through Load Dump

PWR007 Industrial Mobile Machine Power Supply

PWR007 Sepic Brick – Operates Through Load Dump
– Excellent thermal management when potted in Aluminium Enclosure
– Operates through load dump (up to 200V in)
– 24V nominal output
– Reverse polarity protected
– 2 sepic converters operating 180deg phase
– output power limited by coupled inductor rating

PWR001 24V Mobile Plant Power Supply – Operates Through Load Dump
– Fits a SZOMK APPK07 Enclosure
– 24V Nominal output
– Operates through Load Dump (up to 200V in)
– Reverse polarity protected
– 4 sepic converters operating out of phase
– Superseeded by PWR007

Distributed Controller – HVAC – IO – DIN001

DIN001 Distributed Controller – BMS / HVAC / IO – Fan Interface

Applications:
– Distributed Control Systems
– RS485 Networked Systems
– HVAC

On Board:
– STM32F091RC – intended for MODBUS master(s) and/or slave(s) and device abstraction
– 2 Isolated RS485 ports (Backbone and local Fan Speed Controller)
– 1 non isolated RS485 Port (local smart sensors)
– 4 Analog Inputs (Voltage or mA depending on BOM) – eg suit Gas Sensors
– Isolated Analog Fan Interface (0-10V and Enable)
– Robust power supply for 48V backbone power supply (30V – 48V)
– Local 24V Supply for Sensors
– STM32F091RC
– SPI Flash for Logging and Settings MX25R8035 (1 MByte)
– board exists – tested controlling Car Park Ventilation Fans – see the videos
– 6 unit / module (108mm wide)  EN 60715 TH35 Din Rail Enclosure
– Fits SZOMK DIN Enclosure AK-DR-04
– Plug In Terminal Blocks

This distributed control product will be offered for manufacture under license – contact us for further details.

We are looking for Car Park Ventilation FAN manufacturers interested in having their FAN driver in our firmware, please do not hesitate to contact us.

DIN001 TestBlockDiagram 20171220

Short videos showing our DIN001 with some ventilation FANs.
VIDEO 1
VIDEO 2

Distributed Controller – HVAC – IO – DIN002

DIN002 – Distributed Controller
– STM32F405 – intended for processing BACNet SMTP and MODBUS master(s) and/or slave(s) and system abstraction
– 3 Isolated RS485 ports
– Relays
– Analog Inputs
– Robust power supply for 48V backbone power supply (30V – 48V)

DIN003 – Display
– a Display for DIN Controllers (eg DIN002)
– UART interface

Display development boards – OLED / TFT / General development boards

DEV010B STM32F091 OLED DEV Board

There are Demo Apps for this board – see the Detailed Product Page and the Downloads page, some apps are included with the Gerbers.

Other Bits I Find Useful 

MECH013E Tray 70x70x10