• 24V Power Supply for Mobile Plant
• 28V nominal in (alternator and 24V battery systems)
• low input voltage lock out / shutdown (configurable by parts BOM)
• PCB fits AKP07 Din Rail Enclosure – uses the terminal block for that enclosure – see SZOMK
• Reverse Polarity Proof – internal fuse does not rupture
• Input and Output 0V common
• 4 Sepic converters operating in parallel, synchronised
• transient protection (1.5KE200A and X rated CAP)
• Bulk Storage Capacitance for output

PWR001 24V Mobile Machine Power Supply

**At the time of writing this is a download in progress. As further testing information becomes available it will be added. The PCB V1R00 has been built and tested, the updated PCB V1R01 is yet to be built. see the schematics for differences (D109).

** BY DOWNLOADING YOU EXPRESSLY AGREE THAT YOU WILL ASSESS THE SUITABILITY OF THE DOWNLOAD FOR YOUR APPLICATION. By making use of any downloaded material YOU ASSUME ALL LIABILITY for its use. If you do not accept this condition, DO NOT DOWNLOAD THE MATERIAL.

*** I use Altium / Protel DXP 2004. You get the schematics and pcb file. You can send the PCB direct to www.pcbway.com if you wish, you don’t need Protel to get a board.