Category Archives: Download

DISP102 – Board for Small Intelligent Displays

Posted on by

Small Intelligent Display for :

  • Small Industrial IO on MODBUS or CAN networks
  • Small BMS IO
  • Machine Displays / Smart Meters / Smart Readout
  • Can be interfaced to IIC, SPI, UART sensors
  • Onboard 1.8″ ST7735 160×128 RGB TFT or Separate off board display connected by IDC ribbon cable (DispIDC-20)

Design available for download, you can manufacture your own PCBs and manage your supply chain

DISP102 PCB TFT18 OnBoard Display

DISP102 PCB TFT18 OnBoard Display

DISP102 PCB Micro

DISP102 PCB Micro

  • JST SH 1mm Wired IO
  • DispIDC-20 – IDC connector for other displays
  • Simple to load firmware using free ST tools
  • Board Size 47mm x 35mm
For further information see the
DISP102 RGB 1.8″ TFT / DispIDC-20 STM32F091RC – Detailed Product Page
DISP102 PCB DispIDC-20 TFT13

DISP102 PCB DispIDC-20 TFT13. My camera doesn’t do the 1.3″ IPS display justice, the display is sharp and crisp to the eye.

This is a 1.3″ 240×240 IPS display, connected by ribbon cable, instead of the onboard 1.8″ 160×128 TFT display. This enables the DISP102 PCB to support many different SPI displays, and creates options for physical arrangement.

We are calling the off board display connection format DispIDC-20. Options include :

  • 1.8″ ST7735 TFT 160×128
  • 1.8″ ST7735 TFT 160×128 with touch panel
  • 1.3″ ST7789 IPS 240×240
  • 2.0″ ST7789 IPS 320×240
  • 2.4″ TFT 320×240

The DispIDC-20 connection enables a number of different display configurations – see the product page for further information

BLE010 Environmental Sensor CC2640R2F Firmware _20191128_2140

Posted on by

New Firmware for the BLE010 Environmental Sensor
Release 20191128_2140
Pairs with Android EvoThings Demo App 20191128_2140

EvoThingsDemo App – Requires EvoThings App installed on your tablet or phone.
Simply click on the link below from your tablet or phone browser.
Furzy BLE 101 App _20191128_2140 – EvoThings App – Furzy BLE 101 App
For further information see the
BLE010 Indoor Environmental Sensor – Detailed Product Page

DEV010B oLED STM32F091RC – FW01 – MODBUS SLAVE DISPLAY with IO – release 20191021_1500

Posted on by

We have released a new version of FW01 for the DEV010B oLed Display board (20191021_1500).

Configurable operation using MODBUS registers.

For further information see the
DEV010B RGB 1.69″ OLED STM32F030RC – Detailed Product Page
DEV010B RGB 1.69″ OLED STM32F091RC – FW01 – MODBUS SLAVE DISPLAY with IO
DEV010B STM32F091RC OLED FW01 Display

DEV010B STM32F091RC OLED FW01 Display

BLE010 Indoor Environmental Sensor Demo 20190613

Posted on by

New Demo Firmware (.hex) for BLE010 Indoor Environmental Sensor
for CC2640-S1 module with a CC2640R2F device using BLE 4.2 SDK

New Demo App for BLE010 Indoor Environmental Sensor

Demo App – Requires EvoThings App installed on your tablet or phone.
Simply click on the link below from your tablet or phone browser.
Furzy BLE 101 App _20190618 – EvoThings App – Furzy BLE 101 App
BLE010 Environmental Sensor

BLE010 Environmental Sensor

For further information see the
BLE010 Indoor Environmental Sensor – Detailed Product Page

DEV010B Updates

Posted on by

We have updated the SCH to HW V1R02
We have added a BOM (.ods .xls .pdf) for HW V1R02
We have added a new Assembly PDF for contract manufacture

all included with the Gerbers Download

For further information see the
DEV010B RGB 1.69″ OLED STM32F030RC – Detailed Product Page

We have a new demo APP for the IOB002 (IOB002 uses the DEV010B display).

This app has a MODBUS slave driver, and uses 4 registers to display values on the display. Contact michael@furzy.com for information.

We are working on DEV010B FW01. Contact michael@furzy.com for information.

  • Modbus Slave – J4 U5 for UART and RS485 DEN controls
  • User can change Modbus address
  • User can change Modbus Baud Rate (9600, 19200, 38400, 57600, 115200)
  • Modbus Register Set
    • String Identification Registers
    • Data Register Set – use Modbus Read Registers 0x03 to obtain all data in a single request – response cycle
    • Display Object Setup Register Set (display numeric values or strings)
    • Analog Input Object Setup Register Set (Analog inputs on J8 and J6)
    • Digital IO Object Setup Register Set (digital pins on J8 and J6)
    • IIC Sensor Object Register Set (IIC on J4)
    • System Control Register Set

Furzy Electronics P/L

Featured

Posted on by

Michael Kabriel
+612 407 457 674
michael@furzy.com

Electronic Controls and Instrumentation Development

Electronic Devices you can manufacture – designs available – license or contract

  • Mobile Industrial Plant
    – real time plant operator information
    – improve productivity and reduce downtime
  • Process Monitoring
    – Wireless and Wired
    – Industrial Applications
    – BMS (Building Management Systems)
    – HVAC Control
    – IoT and data sources for Big Data

OEMs and Integrators – enjoy the benefits of controlling your sourcing 

  • manage your sourcing, your costs, remove the distribution chain costs
  • manage long term product availability, you decide how to manage manufacturing quantities and scheduling
  • reduce competitive quoting, its your product, your part number, its not available from a distribution chain
  • retain control over system life cycle income – service and maintenance
  • fast track your system development using our IP

Contact us by email or phone now

BLE009A CC2650STK IO Demo Dev Board Gerbers and BOM released

Posted on by

The Gerbers and BOM for the BLE009A CC2650STK IO Demo Dev Board are now available through the Downloads page.

You can use these files to build your own PCBs.

EvoThings AppVer00A _20170710 – Works with Demo Firmware FWVer00A Hex _20170629

 

New BLE Demo App for CC2650 Sensor Tag BLE009A Board

Posted on by

We have released a new Evo Things App (AppVer00A) for the CC2650 Sensor Tag with the BLE009A IO Demo Dev Board

  • Runs on Android and ios.
  • Can be used with a stock CC2650 Sensor Tag
  • Can be used with a CC2650 Sensor Tag with FWVer00A with a BLE009A board
EvoThings AppVer00A _20170710 – Works with Demo Firmware FWVer00A Hex _20170629
AppVer00A_CC2650STK_BLE009A

AppVer00A_CC2650STK_BLE009A

BLE008A TI CC2640 Logging & Settings Plug In Module

Posted on by

A CC2640 with a FLASH (SPI) and EEPROM (IIC) on a small plug in module (JST JMC receptical on the BLE008A).

Primarily intended to be a plug in module to add data logging and BLE enabled settings into a product. The demo firmware will provide a UART MODBUS interface for logging and settings communications with the host system.

This board is a tiny 20mm x 30mm.

BLE008A TI CC2640 Logging & Settings Plug In Module

BLE008A TI CC2640 Logging & Settings Plug In Module

It includes a JST SH 1mm 5pin connector for the cJTAG. The precrimped JST SH cable is available from OnLine marketplaces, and its easy to connect to a CC2650EXL launchpad for a programmer.

The JST JMC connector comes in different plug heights, allowing flexibility in the stacking with the host board.

The BLE008A can also be uses on its own, plug into your IO Sensor board, and you have an instant data logging solution with a BLE interface.

The board mounts a Radioland CC2640-S1 module. These modules have a ipx/ufl RF connector. You can use an external antenna for improved RF performance.

BLE008A TI CC2640 Logging & Settings Plug In Module

BLE008A TI CC2640 Logging & Settings Plug In Module

BLE009 CC2650STK TI Sensor Tag IO Demo Dev Board

Posted on by

An excellent choice for BLE Demonstrations and Development. Very versatile, use for Systems testing (gateway development), peripheral and sensor interface development, and customer proof of concept demos.

BLE009A TI CC2650STK Sensor Tag Demo Dev Board Block Diagram

BLE009A TI CC2650STK Sensor Tag Demo Dev Board Block Diagram

  • BLE009 – CC2650STK TI Sensor Tag Demo & Dev Board
  • Sensor Tag plugs straight in – with mechanical Support for the Sensor Tag
  • cJTAG cable connects directly to CC2650STK for firmware development
  • 2 DI (Opto Inputs)
  • 2 DO (MOSFET Open Drain Outputs)
  • IIC Expansion Header
  • SPI Expansion Header
  • UART Expansion Header
  • AA Cell Holder (1V5)
  • On board boost TPS61221 (low Iq 6uA) – predictable peripheral performance
  • PCB Size 65mm x 59mm
BLE009A TI CC2650STK Sensor Tag Demo Dev Board PCB Outline

BLE009A TI CC2650STK Sensor Tag Demo Dev Board PCB Outline

Available from the Downloads Page

  • Board PDFs (Datasheet, SCH, PCB)
  • Board Gerbers
  • Demo (time limited) Firmware
EvoThings AppVer00A _20170710 – Works with Demo Firmware FWVer00A Hex _20170629

 

BLE005 CC2650STK TI Sensor Tag IO Demo Dev Board

Posted on by
  • BLE005 – CC2650STK TI Sensor Tag Demo & Dev Board
  • Sensor Tag plugs straight in – with mechanical Support for the Sensor Tag
  • cJTAG cable connects directly to CC2650STK for firmware development
  • 1 DI (Opto Input)
  • 1 DO (MOSFET Open Drain Output)
  • 1 AI (Analog Input)
  • 1 Switch Contact Monitor with Wetting Voltage
  • On Board AA/2 cell (3V) (for Lithium Cell SAFT LS14250 recommended)
  • PCB Size 62mm x 46mm
BLE005 CC2650STK TI Sensor Tag IO Board

BLE005 CC2650STK TI Sensor Tag IO Board

Available from the Downloads Page

  • Board PDFs (Datasheet, SCH, PCB)
  • Board Gerbers
  • Demo (time limited) Firmware